AndroidTV Firmware Upgrade Process

Main Part of Firmware upgrade process:

1. Format an atleat 1-GB but not exceed to 32 GB USB Flash Drive to FAT32.
2. Copy the file named "upgrade_loader_common-xxxx.pkg"(Around 700MB）into the root of the USB;
3. Remove the power plug from power source, then connect the USB flash drive to USB 2.0 Port of TV, and finally turn on the TV with remote;
4. The upgrade process will start, and there will be boot up logo showing on the screen during this time that  will stay on your screen for atleast 5 minutes;
5. The TV will restart automatically, and restart again after another 5 minutes.
6. Select General Setting->Out Factory Reset funciton ;
7. Finish.(To avoid the TV upgrade again, better remove the USB or delete the software in the USB )
Remark: Above process takes around 14 minutes.

You can acquire "upgrade_loader_common-xxxx.pkg" here: https://drive.google.com/file/d/1Ow6NVhYtTwoDgcFGwN92IOiNMJ20CqjZ/view?usp=sharing

Firmware Upgrade is Available for the following Skyworth AndroidTV;

• 55G6
• 55G2

---